The single mode 1xn splitter chip block has polished andfaces, and optical circuit of one input port multiple oustput ports(n) for divinding an optical signal.

The PLC Splitter Modules are available 1:4, 1:8, 1:16 and 1:32 with the following outputs:
• 250um primary coated • 900um tubing • ribbon output

The PLC Splitters products are tested according to Telcordia. Please find iformation about the Out-puts designs & configurations below:

Fiber-array blocks are assembled from glass components either mechanically or lithographically fabricated fiber grooves. Standard arrays are designed for 125mm fiber on 250 mm centers. Fiber Pitch control is ±0,5 mm.
The fiber block face is polished at an ?=8° angle as standard.

Arrayed-Waveguide Grating Multi/Deplmultiplexer modules of an optical chip having focusing slab waveguides and a phase array of multiple-channel waveguides with constant path length differences between neighboring channels. The AWG modules function as 1´n or n´n optical multi/ demultiplexers for Dense Wavelenght Division Multiplexing (DWDM) systems.

• Operating Wavelength: 1.55 µm band
• Number of channel: 8, 16, 32 or 40
• 3dB Full Bandwith: About 40% of channel spacing
• Insertion Loss: 8dB for n=16
• Operating Wavelength: 1.55 µm band
• Isolation > 25 dB
• Pigtails: 8 Ribbon Fan outs & Connectors Nominal Lenght 1m

• Dense-WDM systems
• Optical wavelenght routers
• optical signal processing

• Custom designed foundry services
• DWDM Chip supply available